Not every home has a sump pump, but this can be one of the most labor-intensive plumbing repairs. I recommend calling a plumber if you aren't comfortable with doing any sort of electrical work. Always unplug the motor before doing any work. Be sure to double check with your local building inspector before making any major changes to your sump pump system.
Clogged or jammed garbage disposals are some of the easiest repairs to make. You don't even need an extra tool because every new garbage disposal should come with a hex wrench attached to the disposal itself. Your garbage disposal should also come with instructions on how to properly repair the disposal if it gets jammed. Always make sure the power to the disposal is turned off at the source before you attempt any repairs. Make sure you know what types of foods are intended for garbage disposals, and run it as often as you can to prevent clogs or jams.
To work independently, a plumber is required to receive a license. In most states, the prerequisite for earning this license is two to five years of practical experience. There's also an exam to test technical know-how and understanding of plumbing codes. The United Association's website offers extensive information on licensing requirements by state.
Some allege that putting a brick in the toilet tank can save water, but doing that can keep your toilet from flushing correctly. Another plumbing tip, avoid liquid drain cleaners. Liquid drain cleaners are also bad news—they eat away at the pipes. Try a plunger or, better yet, a $30 auger. Don’t have either? Here’s how to unclog a toilet without a plunger.
I called John, of JD’s Plumbing on a Saturday afternoon, after the hot-water pipe under the bathroom sink blew-out. John was able to contact his tech, Jimmy, who came right out, at the end of his day and fixed the pipe just in time for our guests to arrive and for Jimmy to get to his grandfather’s birthday dinner! He did not have to come out – his...
CON'T FROM COMMENTS EARLIER. However, the installation took less than 3/4/ hour and was a basic regulator with no other function. Looking up the price afterwards, invoice did not list type or price, it appears that it would have cost me around $60 for the regulator and another $15 or so for the additional supplies necessary to install it and it was really a rather simple job with easy access. Given that, it seems that $300 for less that an hours worth of on site work, company says it does not include commute time in its prices, is a little high. While flat rate quotes are nice, they must take into consideration situations where the work load differs depending on the circumstances. Therefore, unless you are at the upper end of the harder work needed than the average job. it can be argued that my estimated price of $300 for labor was more than a little high. Maybe I am wrong since I have not used their services for years and am not knowledgeable of the costs of equipment and professional labor today.
Disclaimer: Plumbers Today is a free service that connects users with plumbers in their area. All contractors are independent and are in no way affiliated with Plumbers Today. Plumbers Today can neither endorse nor guarantee the quality of any work performed. It is the responsibility of each user to vet the contractor that he or she hires, and to confirm that the contractor meets all licensing and insurance requirements in that jurisdiction.
Do you have a clogged drain that won’t go away no matter what you do? Is it driving you crazy? Stop wasting your time with dangerously harsh chemicals that don’t even work! You need to call the professionals at Affordable Rooter Service for immediate assistance and clear that drain once and for all. Our team has specialized equipment and the latest technology to quickly clear any drain that is giving you a problem. More than a decade of experience means we get it done right the first time.